Front fiberglass loose and dented
Hi all, just arrived at our first stop of 5 on a 1600 mile trip. Upon arrival we noticed the front fiberglass is bubbled and dented. I waxed the camper before we left and this was not like this. So...
Forum Discussion
Good some humor. The way this was built is horrible, behind the filon were 3 2x2' running horizontally from 1 side to the other. There were not adhered to the filon and simply screwed to the side wall. The area that was dented, or concave, was between the 2x2's, and probably right where the wind is hitting from above my truck. There was a little moisture but no rot.
So I glued in a 2x3 horizontally in the center on the concave area, pushing it back out and glued blocking between that and the bed wall framing.
I would post pictures but can't from my phone, when I get to WiFi I will upload some. Thanks for all the comments, we are off for 400+ miles to Montreal tomorrow, and we hope this works!
So I glued in a 2x3 horizontally in the center on the concave area, pushing it back out and glued blocking between that and the bed wall framing.
I would post pictures but can't from my phone, when I get to WiFi I will upload some. Thanks for all the comments, we are off for 400+ miles to Montreal tomorrow, and we hope this works!
