Grease or Disks for 5th Wheel Hitch Plates?
What is the preferred method to grease your plate on the hitches? Do you prefer the grease disks or traditional grease? I am using a B&W Companion Hitch
Forum Discussion
lakeside013104 wrote:
I have a Hensley TS3 air bag hitch. I use the Teflon 1/8" thick disc only (available from Hensley). The 1/4" thick disc will not allow the jaws on the TS3 to close because the tolerance is so close on this hitch. This close pin to jaw tolerance removes any pin "slop" from the equation. No grease required on the disc. I do put a small amount of white lithium grease on the pin and the jaws of the hitch.
Lakeside
Have the same hitch, used an over the counter plate and it works fine.
