Help with Companion Pivot Arm position Please
Installing our new B & W Companion today. In the instructions I get 9 options for where to mount the Pivot arm for different vertical and horizontal positions. I can figure out the vertical placemen...
Forum Discussion
Cummins12V98 wrote:
I would install the support posts exactly opposite as shown in the pic above. He is all the way back. He is actually removing weight from his front axles. Proper placement is 2" ahead of center of rear axle. With mine full forward I am only adding about 120# to the front tires. So put the vertical edge to the front of the truck as far forward as possible. I have a bike rack mounted to the kingpin and have no clearance issues with the cab clearance.
Thanks. Also thinking about a kingpin rack from arvika, pricey but seem to the job. Will wait a see if I can fit 4 bikes inside first.
