Help
New here. Looking for a little help on a few issues. First, I have a 2013 Ram 2500 single with cummins 6.7l and I am looking at a 38ft 5th @ 10800 dry weight. Anyone see any issues towing that combi...
Forum Discussion
Cummins12V98 wrote:
Find out what the GVWR of the RV is then take 25% that is what you should figure as your pin weight. Load your truck with bodies, fuel, hitch gear and hit the scales. Take your RAWR and subtract your actual rear axle weight. If the 25% number is less you are fine.
Personally I would not tow anything that long with a SRW.
YOU DO THE MATH.
Well that figure may work for some, if I used those numbers you gave I would have a pin weight of 3875 , not hardly, mine is 2420 fully LOADED on the scales ,not a calculator. GVWR on mine is 15500. YOU DO THE MATH !!!!!!
My advice to the OP ,get the weights off the scales, not off the internet .