Hooking and unhooking?
We have two driveways in which to park a 26 foot fifth wheel. Both slope down away from the rig, but one is a slope and a bit of a turn also to stay on the pavement. We don't have a rig yet, but w...
Forum Discussion
Chock trailer wheels well. Maintain truck pressure back against the hitch to open/ close the hitch jaws.
Measure your trucks unloaded hitch height, cut a 1 x 2 stick that length, with marks on it for truck wheelwell height when unhooking trailer, use trailer landing jacks until those marks match ( load off), use it to get the trailer pin just right when hooking up. And mark your slide widths on it so you can be certain of clearance.
Measure your trucks unloaded hitch height, cut a 1 x 2 stick that length, with marks on it for truck wheelwell height when unhooking trailer, use trailer landing jacks until those marks match ( load off), use it to get the trailer pin just right when hooking up. And mark your slide widths on it so you can be certain of clearance.
