How to correct a sagging entry door?
I have a question for the more experienced RVers. I've been full-timing for the last 3 years. After a short 20 mile tow following some maintenance I discovered my entry door more difficult to close. P...
Forum Discussion
enblethen wrote:
That sounds almost what mine was doing. That is why I used the stainless washers. Hardest part was getting the piano hinge pins to start to come out.
Thanks enblethen. I have resorted to my e clip pattern. I have three 7/32 e clips inserted on all three hinges. The difference is that I put the clips between the hinge and the factory bushing. The door is probably back to the way it was before. It still drags a bit but not unbearable. However, I did notice this morning that one clip was working itself off. Might indicate I haven't found the fix just yet.
Ken
