Installing an automatic transfer switch
I'm installing a transfer switch in my 5ver. The transfer switch has three sets of labelled terminals: Control; Power Cord; Generator. It would be simple enough to just follow the labels but I want ...
Forum Discussion
time2roll wrote:
No don't jump it over to both. Cord to Cord, Gen to Gen. Control(output) to the inverter charger input.
Inverter/charger output to the main panel or circuit you want powered.
Seems easy as long as all is 30 amps or all is 50 amps. A bit more complex if it is 30/50 mixed.
My inverter charger is only 30 amps so I don't want to run shore power through the inverter charger's internal transfer switch.
