Installing an automatic transfer switch
I'm installing a transfer switch in my 5ver. The transfer switch has three sets of labelled terminals: Control; Power Cord; Generator. It would be simple enough to just follow the labels but I want ...
Forum Discussion
I have a XantRex Freedom 458. If I wire as I explained in my first post I'm quite sure it would work just fine. The Xantrex input would be powered up from shore power through the parallel connection at the transfer switch. The inverter ac output would come into the transfer switch Power Cord input. Shore power, being connected to "Generator in" at the transfer switch should open the "Power Cord" circuit. There may be something I'm overlooking but I'm confident enough to give it a try unless someone can explain why it won't work.
