JT Strong Arm Installation Question
'Afternoon, everyone. I just picked up the JT Strong Arm kit from my local CW for my 5th wheel. Got the over 58" kit as my legs are 59 1/2" apart. I haven't unboxed everything yet (picked up the ki...
Forum Discussion
Last thought,
If you have done this job before, and/or have a helper, then the whole job can be done by noon.
If you are going to read as you go along, and measure twice and drill once, do not be surprised if only the fronts are done at noon. Drilling and tapping the holes consumes a bit of time all by itself.
If you have done this job before, and/or have a helper, then the whole job can be done by noon.
If you are going to read as you go along, and measure twice and drill once, do not be surprised if only the fronts are done at noon. Drilling and tapping the holes consumes a bit of time all by itself.
