I have a 2013 Keystone Fuzion equipped with 2 ECI Fuel Systems gasoline tanks. ECI lists locking fuel caps as Part #2404. They referred me to 2 RV parts distributors who quoted me $70.00 per cap. I'm not willing to pay that amount for locking fuel caps.I've called Stant and they said that they plan to offer them by the end of 2016. Called Gates who said Stant makes their fuel caps. Next call is Motorad, but I'm wondering if anyone on this forum may have already solved this issue.Thank you,Russ

As cheap as fuel is today why bother with locking gas caps?

I am not as concerned about fuel theft as I am about vandalism - sugar, sand, etc.

Tried the local auto store for a generic match?

Years ago on this forum I got a number for a locking cap (believe its a stant) that fits on my 07 Raptor fuel tank. I will take a look tonite to see if there is any number still visible on the cap itself. Is yours a vent or non-vent model?

I believe it's a vented cap.I called Stant again and spoke with a different Tech who stated that they DO make the gas caps for ECI. He recommended their cap #10501. Ordered 2 of those from Amazon Prime and will receive them tomorrow. Will report back with success or lack thereof!

Keystone Fuzion/Raptor locking gas tank caps | Good Sam Community

corvettekent
Explorer
Mar 22, 2016
As cheap as fuel is today why bother with locking gas caps?
CarlT100
Explorer
Mar 23, 2016
I am not as concerned about fuel theft as I am about vandalism - sugar, sand, etc.
dcg9381
Explorer
Mar 23, 2016
Tried the local auto store for a generic match?
Badhabt
Explorer
Mar 24, 2016
Years ago on this forum I got a number for a locking cap (believe its a stant) that fits on my 07 Raptor fuel tank. I will take a look tonite to see if there is any number still visible on the cap itself. Is yours a vent or non-vent model?
Kepler4
Explorer
Mar 24, 2016
I believe it's a vented cap.
I called Stant again and spoke with a different Tech who stated that they DO make the gas caps for ECI. He recommended their cap #10501. Ordered 2 of those from Amazon Prime and will receive them tomorrow. Will report back with success or lack thereof!
Y-Guy
Moderator
Mar 24, 2016
From Badhabt comment I grabbed some old threads from the archives, found one post that might be helpful from another member, below is the link to all the threads.

The Stant locking gas cap # for a Raptor 299 is 11501, appears the old part number is close to the one you ordered. Please do let us know if it works. Vented is the key issue.

Threads from the Archives (over a year ago) click here
Bedlam
Moderator
Mar 24, 2016
If your fuel caps are behind doors, you can change your locks to a less common keying.
Kepler4
Explorer
Mar 26, 2016
Y-Guy wrote:
From Badhabt comment I grabbed some old threads from the archives, found one post that might be helpful from another member, below is the link to all the threads.

The Stant locking gas cap # for a Raptor 299 is 11501, appears the old part number is close to the one you ordered. Please do let us know if it works. Vented is the key issue.

Threads from the Archives (over a year ago) click here

The Stant 10501 locking gas caps fit perfectly on my Fuzion ECI factory fuel tank fill pipes for the generator and the fuel station.
They are vented as well.
Rambino
Explorer
Mar 26, 2016
I purchased a pair of keyed alike locking gas caps for a Fuzion at AutoZone. Same cap as an 89 LeBaron and many other vehicles.
coolbreeze01
Explorer
Mar 26, 2016
I bought a Duralast 5795 at Autozone, comparable to the Stant 10595.