"Laminated Aluminum Floor" Definition?
Stopped to pick up a tube of lap sealant and dear wife said let's look at that 5er the dealer had parked next to the door. Not sure that I want to sink the money into a new rig but I told her I wou...
Forum Discussion
The top layer in a Forest River laminated floor is 8mm Luan plywood and is sourced from China. Its roughly 5/16" thick. The foam and aluminum tube in the middle of the sandwich are 1-1/2". The bottom layer of luan plywood is 3mm thick, roughly 1/8".
Those floors are great until they're not. They tend to fail at high travel / traffic areas. At the entrance door, in front of the sink, in the bathrooms. The foam compresses and the adhesives fail. If the owner/users are of great bulk, good luck.
Some Forest River brands / divisions stopped using the laminated floors altogether, an example is Rockwood/Flagstaff. They switched to 5/8 tongue and groove plywood floors (not OSB) mid way through the 2017 model year. Laminated floors are garbage.
Those floors are great until they're not. They tend to fail at high travel / traffic areas. At the entrance door, in front of the sink, in the bathrooms. The foam compresses and the adhesives fail. If the owner/users are of great bulk, good luck.
Some Forest River brands / divisions stopped using the laminated floors altogether, an example is Rockwood/Flagstaff. They switched to 5/8 tongue and groove plywood floors (not OSB) mid way through the 2017 model year. Laminated floors are garbage.
