landing gear dual motors

cutty72 wrote:

ssduane wrote:

cutty72 wrote:
Is there a big advantage to having a motor on each leg? Mine has gone up and down fine with just the one motor.

I don't have to carry blocks to level, since each is independantly wired, which makes side to side leveling much easier. I don't every listen to my landing gear strain like they used to either.

Actually yes, when I bought it while waiting for the PO to get the batteries, I cranked it up (and down) to hook it up. Not that hard, just a slow process.

Ok? glad you got to experience that.:?

I had times when the single motor didn't want to pick the rig up. Where I store my rig is not level- so the rig is nose down. She really used to struggle before I got the dual set-up. There were other occasions too. I'm really pleased with the duals

ssduane wrote:

cutty72 wrote:
Is there a big advantage to having a motor on each leg? Mine has gone up and down fine with just the one motor.

I don't have to carry blocks to level, since each is independantly wired, which makes side to side leveling much easier. I don't every listen to my landing gear strain like they used to either.

Actually yes, when I bought it while waiting for the PO to get the batteries, I cranked it up (and down) to hook it up. Not that hard, just a slow process.

*quoted wrong person.. deleted.

cutty72 wrote:
Is there a big advantage to having a motor on each leg? Mine has gone up and down fine with just the one motor.

I don't have to carry blocks to level, since each is independantly wired, which makes side to side leveling much easier. I don't every listen to my landing gear strain like they used to either.

I've had a few times where the one motor really strains, like if the front is dropped way down to level the rig, got so hot had to let it rest. Ever tried manual cranking? NOT FUN!

cutty72 wrote:
Is there a big advantage to having a motor on each leg? Mine has gone up and down fine with just the one motor.

Wouldn't say a big advantage,but the motor is not trying to spin both legs down.Plus the chance of both motors quitting at the same time is about nill.If 1 quits you only need 1 jack to get unhooked.

Is there a big advantage to having a motor on each leg? Mine has gone up and down fine with just the one motor.

I ordered these, 475 for the pair to the house, work great and were a direct fit for my old standard landing gear.

http://www.amazon.com/gp/product/B0033XXXG4/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

Well I tore into the landing gear situation, apparently the shaft that drives the main landing arm from the gearbox broke inside the landing gear arm and it also broke off one of the two corners of the gearbox where one of the lugs is that keeps it from spinning when power is applied sooo, for now I have ordered a new main landing gear with gearbox and motor to replace the one side. Guess my dual setup will go on hold for now but I will have a spare motor and gearbox. When I get the old leg out I'll look and see if I can rebuild the upper end for a spare.