Landing gear lock pin sheared.
Our friends and neighbors had a landing gear problem in the campground yesterday. It appears that the large lock pin was too weak and it sheared off. There was a loud "boom" and none of us knew wh...
Forum Discussion
Durb wrote:
Bought a used trailer (11,000 GVW) that has 3/8"Lippert pins for the landing gear. The holes in the lower leg take a 7/16" drill bit with no play at all. Lower leg 2" square, upper 2 1/4" square. Do I have the correct pin or is 3/8" undersized?
Sounds right to me. Would be too hard to align if all 4 holes were right on 3/8". I have 3/8" pins on my 10k GVW.
