Forum Discussion

OutdoorPhotogra's avatar
OutdoorPhotogra
Explorer
Nov 28, 2017

Locking B&W Companion Ford OEM

So I got the hitch in yesterday and it amazing how easy it is to put in or take out of the truck. I went to replace the pins with locks to secure it from theft and the hole is too small for any lock I had with a long enough shank. I don't want a lock that is easy to cut.

I have a lock set to lock my bumper hitch receiver and a ball hitch and the ball hitch lock is too big. It is designed where a thief can't access the shaft.

Anyone out there have this hitch and have a recomendation for a specialty lock?
  • ACZL's avatar
    ACZL
    Explorer
    Nov 28, 2017
    I think Cummins has this hitch and pics of it w/ locks. Am sure he'll chime in. I don't have the Companion, but the Patriot. LOVE IT !!!!!
  • Learjet's avatar
    Learjet
    Explorer
    Nov 28, 2017
    I ran a locking cable through the front bed tie down under the hitch base and around and over the front pivot bolt on the head. Keeps everything locked down. I know when I had my Ford the tie downs were bolted in, on the Ram they are not bolted in.

    Also, my hitch is under a tri-fold cover when not towing, so you can't see it.
  • jkwilson's avatar
    jkwilson
    Explorer II
    Nov 28, 2017
    OutdoorPhotographer wrote:
    I don't want a lock that is easy to cut.



    No such thing!

    You can open most locks faster with one of these than with the key. :E

    Moderator edit to re-size picture to forum limit of 640px maximum width.

  • spud1957's avatar
    spud1957
    Explorer
    Nov 28, 2017
    Curious.

    Has any heard of a 200lb 5th wheel hitch stolen?

    Honest question. No sarcasm.
  • 4x4ord's avatar
    4x4ord
    Explorer III
    Nov 28, 2017
    Theft is becoming a huge problem around here but so far I haven't started locking things. Having stuff locked up is probably a bigger pain for me than it would be for the thief. If we could all plant a mine field around our property ..... that might rid the world of a few thieves.

    he he
  • MFL's avatar
    MFL
    Nomad II
    Nov 28, 2017
    A lock through the jaw release handle pin hole will deter a prankster/idiot. Otherwise when not in use, out of sight, using bed cover, is probably best option to deter opportunist thieves.

    Best to just enjoy that solid, but easy in/out hitch, and just not worry about it.

    Jerry
  • corvettekent's avatar
    corvettekent
    Explorer
    Nov 28, 2017
    My B&W Companion has been in the bed of my truck for 8 years with no lock. I just don't see any need to lock it.
  • Cummins12V98's avatar
    Cummins12V98
    Explorer III
    Nov 28, 2017
    I only have 5 locks on mine. I drilled out the pins that hold the head on so I could use the small Masterlocks shown they are keyed alike. The 3 larger locks are also keyed alike, the locking handle for the latching system did not need to be drilled out but the two on opposing corners I had to drill out the base latching handles for the larger locks to fit.

    The pins that hold the head on should be bent at a 90 to keep them from being able to be pulled thru the holes in the head.

  • Cummins12V98's avatar
    Cummins12V98
    Explorer III
    Nov 28, 2017
    4x4ord wrote:
    Theft is becoming a huge problem around here but so far I haven't started locking things. Having stuff locked up is probably a bigger pain for me than it would be for the thief. If we could all plant a mine field around our property ..... that might rid the world of a few thieves.

    he he


    I thought you Canadians are all about peace and love "EH" ? :B
  • FF286's avatar
    FF286
    Explorer
    Nov 28, 2017
    I thought you Canadians are all about peace and love "EH"

    Some people LOVE to help themselves to what you have worked for, it’s easier than getting a job.

About Fifth Wheel Group

19,006 PostsLatest Activity: Jan 13, 2025