Low profile tool box and fiver
Looking to put a tool box in the truck. previously I had a box from an S-10 box on welded up brackets that sat flush with the rails. So now I'm considering a over rail low profile box that sits 3" ...
Forum Discussion
Ones that fit entirely below the top of the rails are sometimes advertised as "Tool Chest" rather than tool boxes. I had one in my short bed Dodge that measured 27" front to rear and never had a problem.
In my current long bed Silverado I have a Pace-Edwards retractable cover with a plywood bulkhead across the bed at 30" from the front. The P-E locks at that position, covering the box, and I can still see the hitch plate.
In my current long bed Silverado I have a Pace-Edwards retractable cover with a plywood bulkhead across the bed at 30" from the front. The P-E locks at that position, covering the box, and I can still see the hitch plate.
