Made a removable Flag Pole holder today
Had some time today, so i made this mount... it really only holds the pole straight, the bottom sits in a piece of tube welded to a 1/4" plate x 12inch square on the ground
Forum Discussion
Cummins12V98 wrote:
I have a pc that inserts into the receiver on the rear on my RV. I have tested it to well over 50 mph winds. That is with two full sized flags.
I also have one of those also, but wanted something that I could fly from the front for those back in wooded spots.
This is basically the same premise, but slightly different.
