Main slide will not come in
My hydrolic ram on left side is working, but the gear side will not engage. I have been underneath and the floor has not collapsed on the gear side. I tried to release the pressure with floor jack and...
Forum Discussion
Old-Biscuit and b_pilot you guys hit the nail on the head. Dropped belly pan and out drops broken bolt. Mine is not easy to get to. The worst thing I tried is pushing it in by hand. Bad move now out of alignment. At least I found the problem. I did make call to NuWa and the advice was to psuh the slide in. I am glad I took the time to drop belly pan and look around before pushing slide all the way in. Thanks you guys for the information, and advice.
