MorRyde IS install , day 1

Rob did give me a plant tour, very impressive to say the least. Sergio and keith are both finishing the job today. They looked at the hydraulic lines and said " dont worry, we will fix them and make them look good! At that they cut them at the actuator , all new from there

Even in a blurry pic, those are =nice= welds, Cummins! :-) HEY! Lippert! Pay effin' attention!

Lyle

We had the risers done about 3 weeks ago or so. We added 3" and that puts at 13' 5".

GREAT group of guys there, be sure to ask Rob for a Factory tour.

They re routed my brake lines. Made the job done by DRV look a child originally did it!

VERY high quality products and labor!!!

Sergio did ours as well, great guy and a hard worker. I didn't get much sleep while there, outside the trains, inside the forklifts beeping. Was glad to get it done and out of there.

When we ask, the dog could not be in the rig. Must have changed their policy. We decided to not to add the IS, but sold the trailer for the one in the signature...already had IS.

Ken

TXiceman wrote:
The one problem there is that do not allow dogs in the waiting area,,,so you wind up in the truck with the pups.

Ken

Ours stayed in the rig in te shop with the air running... They are very accommodating here..

8K IS only.. Already had discs and 16.5 "H" shoes....got here at 1:00 pm yesterday, they did all thier measurments, figured on raising the rear by 2", that will put us at 13'1".
Then the weighed eash wheel location and backed us in and took off the wheels..
We stayed in there last night, toured the area all day today, toures Redwood..

Will be ( should be ) ready to roll tomorrow by noon.. $3200.00..while at it, i brought a box of American made Timken bearings, they tossed them on while at it..

The one problem there is that do not allow dogs in the waiting area,,,so you wind up in the truck with the pups.

Ken

buc1980 wrote:
Where you do that?How much?

Mor Ryde Factory in Elkhart, In..... 8k axels, and disc brakes = $5800.00

Hope they let you stay in your rig inside last night, instead of outside by the DRV's and trains :B Unless you just got there today. Be prepared to get up EARLY tomorrow morning.

They sure know their stuff, and do it right. Make sure they give you a new, cool, puffy Mor Ryde sticker for the side of your coach. When you get your t shirts, go up at least one size. They run small.

Did you get Jimmy Johns for lunch?

Ours was supposed to take 2 days, but ended up taking 4.

Congratulations. Hope you are as happy with yours as we are. Best money we ever spent.

Where you do that?How much?