MORryde
We just finished up with MORryde on Thursday. We spent two days and one night in their shop in Elkhart, IN having a 3" spacer added between the frame and MORryde IS suspension so our RV would ride le...
Forum Discussion
RustyJC wrote:Cummins12V98 wrote:RustyJC wrote:
Since we have the same truck except for the rear air ride, I'm curious where you have the mounting arms on the RVK3600 set for your truck - the middle vertical holes? I'm about to put mine together and thought your experience might save me having to do this 2 or 3 times - our Mobile Suites has the 2" riser from the factory between the frame and MorRyde IS and the Trailair triglide that I believe yours has as well.
Rusty
Lowest setting full forward with straight side of hitch head support arms towards the cab. I have 6" 0f bed clearance and a level RV with air bag a little low.
I wound up over the axle (1 set of holes back from full forward) on the lowest setting. I started in the middle of the vertical adjustment, but I was just a tad nose-high with a ton of overhang to bed rail clearance. So, I dropped it to the lowest setting.
Rusty
I would go full forward that way some weight will transfer to the front axle. What you did will work.
