Need advice on setting TPMS alarms
I just got a Carchet TPMS System for my 5'r which has max/min alarms for pressure and a max temp alarm. What would be good settings for these alarms given a load rating E tire? Baseline pressure is 80...
Forum Discussion
bob213 wrote:
When I got my 1st TST there was an additional sheet that recommended 20 per cent above max (or normal running pressure) and 10 per cent below. I still use those percentages's.
Same here,
After taking the sensors off a couple of times to check the pressure , and getting the same readings as the sensors, I know rely on the sensors. Turn system on wait a few minutes and check from the drivers seat. I still do a visual check when doing the walk around.
Ken
