Forum Discussion

Itching2go's avatar
Itching2go
Explorer II
May 04, 2014

Need some advice - HWH bypass on Jayco 35RLSA...

Kind of stuck, and could use some advice/information from you good people. We traded in our older fiver late last year for a 2008 Jayco Designer, 35RLSA. While I have always winterized my own rigs, th...
Itching2go's avatar
Itching2go
Explorer II
May 04, 2014
It's the 16 xt. 10 gallon tank with 16 gallon effective capacity. Mixer valve (PN 90020) is located on the rear, top/center. Taps directly into the tank with a cold water line hooked into the too if the valve, and a mixed hot/cold line output line hooked into the left side of the valve. There is an adjusting 'knob' on the right side of the valve, but once set, it's riveted and glued in place I assume for liability purposes.

About Fifth Wheel Group

19,006 PostsLatest Activity: Jan 24, 2025