Need to remove furnace.
My Suburban SF30 furnace is blowing cold air. While I found plenty of posts of what the problem, I need specific instructions on removing the furnace. I live full time in my 2007 Montana Mountaineer a...
Forum Discussion
There should be 2 screws at the front that hold the furnace in place.Mark your wires that come from the thermostat etc, disconnect propane line,you will need a propane sealant on the threads on the new install.The inside furnace case will be held in place by 2 screws in the back corner,you could leave it in place or replace with the new furnace and case.I would upgrade to the SF35 Q ,should fit .Really a nice quiet unit ,i changed mine from a sf35 to a sf42q.
