New 5th wheel adjustment
We just brought home our new toyhauler on Monday and it's a tad nose high. I've got approx. 9-10 inches of clearance above the bed rails. Question is, is there any difference between lowering th...
Forum Discussion
I figured I'd get raked over the coals as soon as I posted pics for having a 2500. Let's leave that topic for when I actually go and weigh it. There's plenty of 2500's pulling way heavier than me.
Mine has no front slide over the bed and for reference, yes I do have air bags and I had 5 lbs in them when these pics were taken, which is the minimum. Truck sat surprising level. Per the yellow sticker I came home at 13000 lbs full of propane and 42 gallons of gas AND including a Onan 5500 in the belly. So pin should be somewhere around 2700lbs, figuring 22%.
Loaded RAWR WITH hitch was 3400, so I brought it home at roughly 6100lbs on the rear axle. (guessing of course). Yes I understand that's empty but we're not loading 4000lbs of **** in it this weekend either.
Mine has no front slide over the bed and for reference, yes I do have air bags and I had 5 lbs in them when these pics were taken, which is the minimum. Truck sat surprising level. Per the yellow sticker I came home at 13000 lbs full of propane and 42 gallons of gas AND including a Onan 5500 in the belly. So pin should be somewhere around 2700lbs, figuring 22%.
Loaded RAWR WITH hitch was 3400, so I brought it home at roughly 6100lbs on the rear axle. (guessing of course). Yes I understand that's empty but we're not loading 4000lbs of **** in it this weekend either.
