oops
i bought a nice king ranch ford dually got it all set up gto pull 5er oops the 5er sits to low so check the axels to flip cant it has no springs it has torrsen bars system . so before you buy a ...
Forum Discussion
randygk wrote:
Haven't measured the angle or amount nose high, it's not a lot, but my rear axle weight is higher than the front by 500 lbs. With the Torflex the only way to equalize them (if the trailer is evenly loaded) is to make the trailer sit level. I will try to load more weight to the front. Yes, the rep at Dexter yesterday told me they do not recommend the lift kit for my axles. No admission, but I think there may be some issues with certain axles under certain conditions using the spacers. Spacers may work with the OP's trailer, but not for more than 2 5/8 to 3 inches.
Only 500 lbs? If you're under the tire and axle specs, that's a piffle, IMO. :-) If you can load towards the nose, and not overload your truck, go for it, but for 500 lbs, I wouldn't make a huge effort, if well under specs. Just my $0.02...
Lyle
