pin box side hitting trk side rails
Just back from shake down with new grand design 369rl...tv is new 3500 denali srw std bed...have anderson ultimate hitch. In very sharp forward turn...past 60 degrees...the side plates of the trail ...
Forum Discussion
Sorry for the thread hi-jack -- have searched site for 15-20 minutes on how to post new thread -- can't find answer, so .............
2000 Fleetwood Avion Westport 5er sat slightly nose high when connected to my F350 dually. I lowered the hitch in truck bed to the lowest position (which is too low for towing a friend's air ride - bumped my rails).
Need to put hitch back where it was, and adjust the king pin box on my 5er.
There are 10 bolts (approx 1" socket) that must be removed to change the height.
Impossible to get hand into opening to hold the nuts.
I HOPE the nuts are captive-type --- please advise.
I really don't want to pull up the bedroom closet floor to access the nuts ! ! !
btw - where are instructions on new posts ???
2000 Fleetwood Avion Westport 5er sat slightly nose high when connected to my F350 dually. I lowered the hitch in truck bed to the lowest position (which is too low for towing a friend's air ride - bumped my rails).
Need to put hitch back where it was, and adjust the king pin box on my 5er.
There are 10 bolts (approx 1" socket) that must be removed to change the height.
Impossible to get hand into opening to hold the nuts.
I HOPE the nuts are captive-type --- please advise.
I really don't want to pull up the bedroom closet floor to access the nuts ! ! !
btw - where are instructions on new posts ???
