Forum Discussion
Me_Again
May 23, 2015Explorer III
What he ^^^ said.
However. Put one meter lead in the 3 o'clock hole and the other in 9 o'clock and you will read 240V, there are two hot legs and are opposite phases.
If they were the same phase then you would read zero votes. That is not however how they are wired as it would double the current on the neutral, overloading that single wire.
Chris
However. Put one meter lead in the 3 o'clock hole and the other in 9 o'clock and you will read 240V, there are two hot legs and are opposite phases.
If they were the same phase then you would read zero votes. That is not however how they are wired as it would double the current on the neutral, overloading that single wire.
Chris
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 13, 2025