Anyone do a total rebuild of a TH ramp?
We bought a used TH that had a couple soft spots in the ramp that are just getting worse, so I'm probably looking at doing a total rebuild in the near future and was hoping to get some guidance. It ...
Forum Discussion
Rebuild is done!
Less than $250 but LOTS of sweat. It's noticeably heavier but nice and solid for the first time since we've owned it. I caulked everywhere it looked like moisture might even think about getting in.
The problem with my plan above is the channel was actually 1 5/8" not 1 3/4", so going back in was a very tight fit. Fortunately foam can be compressed.
I took pictures as I went so when time permits I'll try to put together a narrated slideshow to post on YouTube.
Less than $250 but LOTS of sweat. It's noticeably heavier but nice and solid for the first time since we've owned it. I caulked everywhere it looked like moisture might even think about getting in.
The problem with my plan above is the channel was actually 1 5/8" not 1 3/4", so going back in was a very tight fit. Fortunately foam can be compressed.
I took pictures as I went so when time permits I'll try to put together a narrated slideshow to post on YouTube.
