I was concerned about this same issue. We purchased a RW 38GK last September at the Hershey RV Show, and the dealer agreed to store it a year since we don't start FT until the end of 2014. This gave me time to get the best TV for our useage. I had already decided that a standard pickup box would offer awfully low clearance and little lockable storage, so I started looking for utility bed bodies I could mount on a Ram 3500 crew cab chassis cab dually, and found the Knapheide Westerner body. The bed sits an inch higher than the standard pickup, but the rails are seven inches lower, so this should give me plenty of clearance while also giving us about 40 cubic feet of lockable storage for tools and stuff. This rig will be delivered in June and will go to the Knapheide dealer, where they'll install the body. They will have to fabricate some brackets for the 22K Reese's hitch, but this shouldn't be a big problem. The moment of truth will come when I get the TV and drive the 300 miles to the RV dealer to pick up the 5er. It may be perfect, we may have to adjust the height of hitch and/or pin box, or it may all go horribly wrong. I did the research for two months, but some times the best laid plans of men... :-) If I had the $30K I'd have ordered a hauler body from Classy Chassis, but that was too rich for my blood. I'll let you know how it all works out.
