Repairing fuel station pump
My pump wasn't turning on so I loosened up a couple of bolts on the gear cover panel and then it started pumping again. Wasn't leaking or anything after loosening the bolts but I investigated some mor...
Forum Discussion
my pump froze up again this weekend.
I've sanded the gears before when it happened.
did the same thing this time and its running like a champ again.
I just use some 180 grit on a flat surface and do it by hand in a figure 8.
you need to be really careful using a belt sander.
I've sanded the gears before when it happened.
did the same thing this time and its running like a champ again.
I just use some 180 grit on a flat surface and do it by hand in a figure 8.
you need to be really careful using a belt sander.
