Forum Discussion
exp_II
Jul 11, 2016Explorer
Mine was doing the same thing, I looked on the web and checked almost everything
What I found was when I tested the heater element for the 110 volt it tested open
I think when it failed it also blew a fuse in the print cucuit board
this all sits behind the outside panel that can be removed.
Something like this
What I found was when I tested the heater element for the 110 volt it tested open
I think when it failed it also blew a fuse in the print cucuit board
this all sits behind the outside panel that can be removed.
Something like this
About Fifth Wheel Group
19,006 PostsLatest Activity: Jan 24, 2025