Forum Discussion

rkassl's avatar
rkassl
Explorer
Jan 24, 2016

Removal of SuperGlide Capture Plate from Morryde Pin Box

Has anyone remove the special capture plate that is used on the Morryde Pin box to work with the Superglide hitch? The reason I ask is we are moving from a short bed to a full bed with a new Pullrite...
dfb's avatar
dfb
Explorer
Feb 20, 2016
There are also 4 plastic blocks against the metal tube rods. It take a 13/16 wrench, and vice grips to keep the rods from turning. Then push the rods to the center of the hitch. Remove the four plastic blocks held in place by one bolt each on the side of the Mor ryde....

About Fifth Wheel Group

19,006 PostsLatest Activity: Feb 18, 2025