Rewiring the brakes
The fifth wheel started pulling to one side when I stepped on the brakes on the truck. I looked at the old wiring and one wire fell right out of a connector when I moved it. I decided to replace the...
Forum Discussion
Waiting for clamps to clamp the wiring to the axle, right now it is taped to the axle with duct tape. So I looked at a video about greasing EZ-Lube axles and ordered 4 tubes of high temperature grease.
Makes sense to check for wobble in the wheels and grease the bearings while you have each wheel jacked up.
I will have my bearing kit handy in case I find one that wobbles.
Makes sense to check for wobble in the wheels and grease the bearings while you have each wheel jacked up.
I will have my bearing kit handy in case I find one that wobbles.
