RCMAN46 wrote:
But in this case the OP did not close the hitch plain and simple.
I am not sure that is a correct statement. When connected correctly the lever will go in all the way by it's self(it is spring loaded to be in). That is why when pulled out you turn it down to keep it open in preparation for coupling up.
My Hi-Jacker worked in a similar way.
If the King Pin is high then the head does not latch properly and the handle is still out part way, as it cannot pop into to the latched position. The lower larger area of the King Pin is interfering with the latch mechanism, which is one of the forms of high hitched. Chris