stupid mistake
Well,today I made a careless mistake and messed up my truck dropping my new 5th wheel. Everything was unhooked, landing gear down, so I attempted to pull my truck out from under the trailer. The only ...
Forum Discussion
JTrac wrote:Cummins12V98 wrote:
I need to drop my tailgate to unplug the RV and also disconnect the breakaway cable. I also carry these blocks in the bed so VERY unlikely the tailgate will get damaged.
I won't be without my backup camera!
The BS-ing part got me big time. Was finishing up getting ready to leave saying our good byes. Started to pull away and there was a lot of noise. Cord was still attached to pedestal. Pulled over pedestal sparks were flying and water bubbling out of the ground. Also pulled the power cable that was hard wired to the RV right out. NOT a pretty picture, I thought the noise was dragging the trees above. I have a policy, I tell people to please leave until I am setup or torn down before we can talk.
Me neither, my backup camera that is. How is that box made? Must be something inside to carry all that weight. Looks like a good idea so tell me how it is constructed, if you don't mind, and please and thank you.
I used one sheet of 3/4" solid core AC plywood to build all 6 boxes. Glued with PL Premium Construction Adhesive and screwed together with 2" coarse thread coated deck screws.
Front are 10x16x10 high, the 4 rears are 10x10x8" high the rears are hollow.
I bought the 1/4" diamond plate rubber matt from Amazon and used 3/4x #8 flat head Phillips to hold them in place.
