Underbelly - Proper way to access
Hi, I need to look behind the underbelly of the trailer for a disconnected heater duct on my new 2018 Cougar 25RES Looking at the underbelly it seems to some type of rivet, not a screw head, tha...
Forum Discussion
Those are 'self penetrating' fasteners (nails) used by Ramset/Hilti Guns which use a .22 caliber shell to 'shoot' the fastener in.
You COULD grip them with a pair of vise grips and tug/yank/twist to try and remove...good luck with that
OR
Just cut a three side window in the coroplast material......uncut side to front of rig.
Access/do repairs then close up the window with Gorilla tape
I have two such windows in my underbelly and they are still held close with Gorilla Tape
You COULD grip them with a pair of vise grips and tug/yank/twist to try and remove...good luck with that
OR
Just cut a three side window in the coroplast material......uncut side to front of rig.
Access/do repairs then close up the window with Gorilla tape
I have two such windows in my underbelly and they are still held close with Gorilla Tape
