Update Ram Mega Cab / GD Momentum 350M (Hitch)
Recently, I posted a question in regard to whether or not I would need a sliding hitch with the purchase of another Mega Cab. In the past I have used a Pullrite Superglide on a 2006 Ram Mega cab 3500 SRW.
I'm happy to say with a 2016 3500 Mega Cab DRW 4x4 and a 2016 Grand Design Momentum 350M, it isn't necessary. This information is obviously for this exact setup
This truck has the factory puck system. I use a Reese Titan 20K hitch on Reese/Ram rails dropped into the pucks.
I slowly tested it backing as tight as possible to both left and right sides as well as completing a U-turn. The coach with the rounded front end cap sides never gets closer than 12 inches from cab. This is the first coach Iv'e owned with this design feature.
I'm happy to say with a 2016 3500 Mega Cab DRW 4x4 and a 2016 Grand Design Momentum 350M, it isn't necessary. This information is obviously for this exact setup
This truck has the factory puck system. I use a Reese Titan 20K hitch on Reese/Ram rails dropped into the pucks.
I slowly tested it backing as tight as possible to both left and right sides as well as completing a U-turn. The coach with the rounded front end cap sides never gets closer than 12 inches from cab. This is the first coach Iv'e owned with this design feature.
