Water heater problem
We've been traveling since the end of May. Our Suburban water heater worked fine using the electric heating element for about two months. Then it began turning itself off during the night. I go outsid...
Forum Discussion
What you are resetting is the high limit t-stat for the electric element.
That means the normal t-stat is not opening when reaching temp set point.
Normal temp t-stat could be failing (loose connections, bad terminals) or it may not be in tight contact with tank wall.
(Fortunately the high limit is opening...that's why you have to reset it)
Get a new t-stat set for the electric element.
That means the normal t-stat is not opening when reaching temp set point.
Normal temp t-stat could be failing (loose connections, bad terminals) or it may not be in tight contact with tank wall.
(Fortunately the high limit is opening...that's why you have to reset it)
Get a new t-stat set for the electric element.
