Wet bolts install
This is directed to those that have installed wet bolts as a single person. Is it hard to reinstall the wet bolts after taking the old bolts out? Do we take all three of the old bolts out then reinsta...
Forum Discussion
Dtank wrote:That's a nice accessory, but, honestly, it's unneeded. A good quality grease gun and with an adjustable grease end will tighten more as you put more pressure on it. A good one will hold plenty tight enough. I've popped out grease fittings with a good hand pumped grease gun.
Generic "zerk" -
For ease in coupling / uncoupling to/from *any* zerk on *any* vehicle, "Lock-N-Lube" is the best $30. you will ever spend!
Available via Amazon or direct.
Lock-N-Lube
No financial or other affiliation with the mfgr (other than the thirty bucks I spent, LOL!)
.
