My 06 fs2300 is going under my surgical skills soon. The floor is soft from the front cargo compartments to almost the seam where the linoleum stops at the wheel wells. Roof and internal walls look ok. I'm thinking of doing 2 staggered layers of 1/2" ply and replacing either the entire floor or at least from the linoleum trim strip forward. As I understand it, their claim to fame was to use a single plank of 1" OSB from tip to tail. Any links/pics/firsthand knowledge or advice is appreciated. I have an indoor barn to do the repair so time isn't a major factor. I'm hoping ill find the leak source upon tearing everything down. Nothing obvious on the roof or sides at this point. I'm not entirely sure how I'm going to get all of the internal walls (bathroom, vanity, queen bed area etc) handled and manipulated with no floor yet. I'm considering dropping all of my tanks too to make an unbostructed workspace but I think I'll just have to see how things come apart and go from there. I see staples through the siding into the underside of the floor plank every nch or so. That should be fun. Any info appreciated!
Dan