Forum Discussion
rdhetrick
Sep 06, 2019Explorer
Sorry you've got such a mess.
You don't HAVE to have the toad lights wired. In your situation, I would be inclined to just pull the toad to Kingman without it being wired for lights. You can remove any wires at the connector on the toad and tape them so they don't short to anything. When you get to Kingman, you can get it set up at your convenience and without the pressure of having to get somewhere.
For the batteries, you can get similar GC2 batteries at Samsclub, or other battery stores like BatteriesPlus. I would think you should also be able to get the slide in and out by leaving the vehicle running. Even if not, this shouldn't prevent you from getting to Kingman, where you'll be able to get them without the pressure of needing to get somewhere.
Good luck.
You don't HAVE to have the toad lights wired. In your situation, I would be inclined to just pull the toad to Kingman without it being wired for lights. You can remove any wires at the connector on the toad and tape them so they don't short to anything. When you get to Kingman, you can get it set up at your convenience and without the pressure of having to get somewhere.
For the batteries, you can get similar GC2 batteries at Samsclub, or other battery stores like BatteriesPlus. I would think you should also be able to get the slide in and out by leaving the vehicle running. Even if not, this shouldn't prevent you from getting to Kingman, where you'll be able to get them without the pressure of needing to get somewhere.
Good luck.
About Customer Support
Our Customer Service team is available to assist you any time between 6am-10pm MST. Ask a question about your account, recent order, and more.2,664 PostsLatest Activity: Jan 24, 2025