Forum Discussion
Oldme
Feb 07, 2015Explorer
Calipers not retracting. It could be rust or
the pistons are not fully retracting or thicker than
original pads.
There should be very little drag.
I have seen some that did not move back as far as they
were originally because the pads were thicker.
After 40 or so miles they wore in the needed clearance.
The danger is warping the rotors if they stay hot for too long.
the pistons are not fully retracting or thicker than
original pads.
There should be very little drag.
I have seen some that did not move back as far as they
were originally because the pads were thicker.
After 40 or so miles they wore in the needed clearance.
The danger is warping the rotors if they stay hot for too long.
About Motorhome Group
38,705 PostsLatest Activity: Jan 14, 2025