1996 Damon Intruder AC Question
My heater and AC Blower motor has quit working on my 1996 Ford F53 Chassis. I had lost the high speed some time ago but was ok with the lower levels as they were sufficient for my needs. However I wen...
Forum Discussion
The assemblies are open resistors.
If there is a diode, reverse your leads and you should get continuity. Diodes pass voltage in one direction and not the other.
There should be no ground.
The main terminal should be coming from the fan switch.
Blower resistor
If there is a diode, reverse your leads and you should get continuity. Diodes pass voltage in one direction and not the other.
There should be no ground.
The main terminal should be coming from the fan switch.
Blower resistor
