1996 Damon Intruder AC Question
My heater and AC Blower motor has quit working on my 1996 Ford F53 Chassis. I had lost the high speed some time ago but was ok with the lower levels as they were sufficient for my needs. However I wen...
Forum Discussion
Here is some new information. It has me baffled to no end.
I removes the blower motor. Hooked up to my lawn mower battery. It took off and runs fine.
While it was out I used my multi-meter and on the two terminals I had unhooked I probed the two wires.
When I set the blower to high fan I get a 11.9 volt reading.
When I go to any of the lower setting I get no readings at all.
So I reinstalled the motor thinking I could switch blower motor to high as I was sending 11.9 volts on the high side but now I get no motor running at all on any speed.
Any suggestions is appreciated as what this could be??
Thanks Much
Denni
I removes the blower motor. Hooked up to my lawn mower battery. It took off and runs fine.
While it was out I used my multi-meter and on the two terminals I had unhooked I probed the two wires.
When I set the blower to high fan I get a 11.9 volt reading.
When I go to any of the lower setting I get no readings at all.
So I reinstalled the motor thinking I could switch blower motor to high as I was sending 11.9 volts on the high side but now I get no motor running at all on any speed.
Any suggestions is appreciated as what this could be??
Thanks Much
Denni
