50 amp rig using 30 amp pedestal
when plugged into 30 amp pedestal, the monitor panel shows 2 legs (or at least 2 separate 120 volt readings. Now I understand, I think, why 50 amp power plug would show 2, 120 volt lines because there...
Forum Discussion
If I was on 30 amp I'd only try to run 1 A/C unit. Microwave, toaster and 1 A/C is a good load by it self on 30 amps. The 2nd A/C is often the reason for the upgrade to 50 amp service. A 15,000 BTU A/C unit is around 15 amps running.
