Advice on installing Eternabond 4" strips?
About 30% of the seam has separated between the extruded aluminum gutter and the flimsy fiberglass roof material on my 08 Itasca 30B. Last year, I recalked several feet of the same seam using Geoce...
Forum Discussion
I can't quite picture your roof but I would not bend around 90 degrees. I would just cut and overlap for the next section. I bought 36" stuff and cut into 9" wide sections and layered over all the existing- original was about 6". Sealed the edge with dicor. Worked great. Next time I will buy the same and cut into 12" wide. One day I will have a full eternabond roof.
