Advice on installing Eternabond 4" strips?
About 30% of the seam has separated between the extruded aluminum gutter and the flimsy fiberglass roof material on my 08 Itasca 30B. Last year, I recalked several feet of the same seam using Geoce...
Forum Discussion
Thank you for the pic posting tips.
Hopefully this will get through first try. The pic isn't great - it's getting dark in McCall ID now.
I'm planning on affixing the eternabond to the upper 1/4" wide vertical portion of the 'gutter' then folding it over the dead calk and up onto the roof.
http://s1318.photobucket.com/user/spotrot/media/DSCF4101_zpsb42bbfdb.jpg.html
Hopefully this will get through first try. The pic isn't great - it's getting dark in McCall ID now.
I'm planning on affixing the eternabond to the upper 1/4" wide vertical portion of the 'gutter' then folding it over the dead calk and up onto the roof.
http://s1318.photobucket.com/user/spotrot/media/DSCF4101_zpsb42bbfdb.jpg.html
