Anyone interested in 83 Pace Arrow Tear down and Rebuild?

Second purchase was for 2 sheets of 1/2" x 4 x 8 plywood. I need most of that for the shelves. I did, however, forget to take a picture of them.

I started laying out the markings on the end panels of the shelves, so I know where the shelves will go.

I measured and marked them, and laid them side by side, just to make sure the shelves will be the same height on both ends.

It's not fun to start putting things together, and suddenly find one end is an inch higher than the other. Been there, done that.