I was working on the drivers side shelving today. During the process I was thinking ......
What ya gonna do, what ya gonna do, what ya gonna do, when ya can't use a screw? I decided to give it a wedgie!...
Say what?????
This was at a spot that I could not use a screw to draw the bottom of the shelf end against the wall. Soooooo,,,,
I clamped a block of wood on the counter top, and proceeded to use a piece of wood that was tapered, (black arrow), and lightly tapped the wedge in until the back of the shelf end was tightly against the wall, with the adhesive between the two, (red arrow). Now, we wait....
