I went to my steel supplier, to pick up some Aluminum angle. I bought a pair of 24' long pieces, 1.5" by 3/16" thick.
I actually had to break out my trailer to haul that, as I was not interested in trying to secure that to the roof of the Pt Cruiser. I know, call me a wuss.. Lol.
Anyhow, I wanted some aluminum, as at some point I will be adding lower sides to the motor home. This will be below the flooring, and I will attach the angle to the bottom of the floor/wall framing, and also attach the siding to the angle. They will be removable, if necessary, but I need to cover up those big holes for inspection.
I also am adding a piece of aluminum angle at the front corner of each of the counter tops. They are currently being held there by a piece of wood that is 1-1/2" square.
Should have that pic tomorrow.
