Forum Discussion
fulltimin
Sep 14, 2020Nomad
The pair of 2x3's have been wedged into place, with a couple of screws to hold them together.
I then added a cross brace to make sure they don't move. Notice that this is done on macadam, so it made things very stable.

The upper corners are wedged in like this, so it's not depending totally on the screws. The screws are here to hold the 2x3 from moving.

I then added a cross brace to make sure they don't move. Notice that this is done on macadam, so it made things very stable.

The upper corners are wedged in like this, so it's not depending totally on the screws. The screws are here to hold the 2x3 from moving.

About Motorhome Group
38,769 PostsLatest Activity: Dec 31, 2014